Concrete Driveways in Colorado Springs, CO

Concrete Driveways in Colorado Springs, CO

A new concrete driveway is one of the highest-impact upgrades a Colorado Springs homeowner can make - it improves curb appeal, increases resale value and gives you a surface that needs almost no annual upkeep. Our concrete driveway installs use a 6-inch reinforced slab with #4 rebar on a 4-inch compacted 3/4-inch Class 6 road base, designed specifically for Colorado Springs’ plow trucks, mag chloride exposure and freeze-thaw cycles.

We handle full demo of the existing asphalt or concrete drive, base prep, forming, rebar placement, expansion joints at the garage and street apron, control joints to manage shrinkage cracking, and a finished surface in your choice of broom, exposed-aggregate or stamped pattern. Pair a new driveway with a fresh concrete apron and curb work for a complete street-to-garage refresh.

All driveway work is fully insured, built to City of Colorado Springs apron standard details where it meets the street, and backed by our 5-year written workmanship warranty.

• 6-inch slab with #4 rebar grid for residential driveways
• Optional 8-inch slab with double rebar mat for trucks/RVs
• Asphalt or old concrete demolition and removal
• Properly graded apron meeting City of Colorado Springs specs
• Saw-cut control joints and silicone expansion joints
• Optional broom, salt, exposed-aggregate or stamped finish

4-Inch vs 6-Inch vs 8-Inch Driveways

Slab thickness drives both price and lifespan. A 4-inch slab is the minimum we'll pour for a passenger-car driveway and is fine for most Colorado Springs residential applications. A 6-inch reinforced slab is our standard recommendation - it adds about 15% to material cost but doubles the load capacity and dramatically extends life. For driveways that will carry RVs, boats, trucks or commercial vehicles, we go to 8 inches with a doubled rebar mat. We'll spec the right thickness based on your actual usage.

Reinforcement & Joint Layout

We use #4 rebar on a 24-inch grid for 6-inch slabs and on an 18-inch grid for 8-inch slabs, placed at mid-slab depth on plastic chairs. Control joints are saw-cut within 24 hours of the pour at no more than 30x the slab thickness (so 10 feet on a 4-inch slab, 15 feet on 6-inch). Expansion joints separate the slab from the garage foundation and from the city sidewalk so each can move independently.

Demo & Base Prep

Existing asphalt or failing concrete is broken out, hauled to a Colorado Springs-area concrete or asphalt recycler, and the sub-base is re-graded. We compact 4-6 inches of Class 6 aggregate base course over undisturbed soil, verify density with a plate compactor, and confirm grade with a laser level before any concrete arrives.

Finish Options & Sealing

Broom finish is the standard for Colorado Springs driveways - simple, slip-resistant, easy to clean. Salt finish gives a slightly more textured look. Exposed-aggregate finish removes the cement paste from the surface to expose the stone, creating a high-end natural appearance. For a fully decorative look, see our stamped concrete driveway work. All driveways are sealed at 30 days with a breathable acrylic that resists road-salt scaling, and we recommend re-sealing every 3-4 years.